Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this instance you'll need source some plastic spacers to help the new pane to fit properly into the frame of the window.

If you are going attempt to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is large, you may think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can get at the frame. Then, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could be due to the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk is applied. It is essential to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is with the seal rather than the frame. This can be easily corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, window Repair or slack and blow open with a breeze, it may be hinges at the fault. These are easily repaired by any skilled DIYer and are usually done within a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It's easy to change a window hinge however it is easier if someone helps you hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are happy to offer suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window Repair easier to open and close. It can also stop corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. First, the hinges because of wear and tear, could become misaligned. This causes a gap to form where the sash meets the frame. If they are beyond repair, it might be required to realign them. In addition, the interlock could also become misaligned. This happens on the hinge's side and could require to be cleaned. In certain instances it is possible to replace them.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window repairs near me window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be put on top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and window repair security for your home with regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.