How to Deal With Double Glazed Repair

It is a good idea to have your double-glazed windows inspected frequently, particularly if you notice the frames are contracting or expanding. This will decrease the chance of drafts.

If you notice condensation between the panes, glazed this is an indication that the seal is failing and needs to be replaced. Replacing the seal will not only help to reduce condensation but will also reduce energy costs.

Broken or cracked panes

Double glazing isn't indestructible and there are a few issues that can affect the efficiency of energy-efficient windows and doors. Repairing double glazing is a easy process, however the right tools and expertise are required to perform high-quality repairs. It is normally best to work with a professional firm to perform the work rather than attempting it yourself.

A broken or cracked pane is the most frequent issue for double-glazed windows. A knock or a blow from outside can cause this, as can attempts to open a window that is closed. The glass may break or crack into small pieces, depending on the size of the crack and the force applied to it.

If windows with double glazing are susceptible to cracking it can be repaired using a form of putty or a special tape. This will prevent the crack growing or becoming worse, and will prevent wind, water or other elements from entering your home through the cracks.

Another problem that is frequently encountered is condensation in double glazing. This is typically the result of a broken window seal. It is a common occurrence that is caused by temperature and weather changes. Before attempting to fix your windows, make sure to see if they are still covered by the warranty.

Typically, this issue will be covered by the company that you purchased the double glazing from. Therefore, it is important to contact them immediately and clearly explain the issue. This is best done in writing instead of by phone or text. Always keep an original copy.

Drilling a hole into the centre of a misted pane is an easy way to repair it yourself. The desiccant absorbs any moisture and will help solve the problem. However this is temporary solution, and it is recommended that you have your double-glazed windows replaced by new units as soon as possible.

Misty Panes

When double-glazed windows start fogging up, it can be a real pain and can cause significant disruptions to your home. If you can pinpoint the issue, it's relatively simple to repair. In most cases the issue is caused by a failure in the seals which separate your window panes. This allows moisture to enter. This can be caused by inadequate installation, drainage issues or even faulty seals from the window manufacturer.

Standard sealed units consist of two glass panes with an open spacer bar sandwiched between them (shown in the above image). The inner face of this bar is perforated, and the bars that are used as spacers are filled with a desiccant, which helps to absorb any moisture that is absorbed into the unit. The two glass panes will then be sealed and the whole unit will be filled with gas to increase its thermal efficiency.

As you can imagine, if the sealed unit fails, then moisture can get in between the panes and this can cause condensation and even mist. This could cause heat to escape from your property, which could result in a significant amount of money being lost due to energy bills.

Repairing a window that has been misted is a challenging task that should not be attempted by a person who isn't well-versed of the construction and glazing industries. However, if you're prepared to take on the challenge, it's possible to fix a misted sealed unit by adding a moisture absorbing desiccant to the gap between the glass panes.

Remember that this is a temporary fix and the condensation could return. The process will have to be repeated. It's more efficient to replace double glazing unit the misted glass and it's much cleaner and glazed quicker. A replacement will also bring back the original insulation of your property which isn't available with a repair. If you are experiencing misted windows or condensation, we recommend contacting a reputable company that offers double glazing. While you wait, keep your windows as dry and clean as possible.

Water Leaks

If they're new or old, double-glazed windows must not leak. Leaking windows are not only an inconvenience but can cause severe damage to your home, including mold development and structural damage as well as higher heating and cooling costs. If you suspect a leak call a reputable window repair service as soon as you can to get the issue under control.

Window leaks are usually a sign of an issue with the seals between panes of glass. If you see condensation between the panes, it's a sure sign that your window seal has deteriorated and that water is leaking into the insulation gap between the glass. While a little condensation is normal, if it persists and becomes visible on the exterior or interior of your home, it's time to call a repair service in.

Another cause of leaks is water collecting at the bottom of the frame of your window. This can be an indication of clogged drain holes, improper flashing or a sloped sill. A drainage hole that is clogged is easy to fix by using a coat hanger wire to clear the gunk. Using roofing caulk, you can fix improper flashing. If the window sill is sloping to one side it may be due to an improper pitch. A professional window repair company can identify the root of the problem and offer a fast, cost-effective solution.

It is not uncommon for UPVC windows that are older to break or leak. However it is much more cost-effective and efficient to employ an expert to repair your double glazing. They can restore the appearance and functionality of your windows to the way they were when they were brand new. They can even replace hinges, handles, and locks if necessary. A reputable window repair service will also provide you with a kind of guarantee for their work, which you would not get if you attempted to repair the window yourself.

Difficulty of Opening

If you notice that your windows are becoming difficult to open, it is best to contact the company through which you purchased them. In most cases the issue is fixable with a simple fix. If the issue continues to persist then you should think about replacing windows with double glazing your windows with modern contemporary designs. Double-glazed windows with modern designs offer modern features that keep your home warm and secure, such as slimline uPVC frames made of aluminium, advanced insulation to stop the heat from escape, and innovative security equipment to stop intruders from entering your home.

Condensation between the glass panes is another common sign that double glazing repairers glazing requires repair. This is due to an issue with the seals which separate the two panes. Inert gas is supposed be able to escape between the glass and replace it with moist air, ensuring that your windows stay airtight and thermally efficient. If this isn't the case, the seals may have become less effective over time due to weather changes or other factors.

A draft from a double-glazed window can be a sign the seals are failing and cold air is getting into your home. This could also lead to higher energy bills as your heating system has to work harder to maintain the temperature in your home.

In some cases, a draught can be fixed by lubricating hinges or handles on windows or doors with double glazing. It is crucial to note that this is only a temporary solution and you will need to contact the experts if the problem persists.

You can also install ventilation systems, such as air bricks, extractors or vents in your doors and windows to assist with the issue of condensation. It is also important to allow your double-glazed doors and windows to breathe by leaving them open as much as possible, which can be achieved with trickle vents.