Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to guard cars against key cloning or hacking is a small device that can be installed without causing damage to your vehicle. It stops your car from starting unless you press the correct sequence of buttons inside your vehicle like a password on a mobile phone.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by preventing the engine from running until it receives the right PIN code. This is done without modifications to the vehicle, and is completely undetectable to thieves. The unit communicates with the ECU via the CAN data bus to immobilise the vehicle. This is similar to that used by car manufacturers for many years. However, thieves are unable to bypass it with a new key or key relay technology, as they can using factory-installed systems.

Ghost is compatible with any vehicle with an engine, including motorhomes, vans, cars, caravans, and bikes. The same system can also be utilized on electric vehicles. It is an excellent alternative to locking the steering wheel and wheel clamps and can be installed with little effort.

If the Ghost is activated it will block all buttons in your car, preventing the ignition from starting without a PIN code. This can be done via the Android or Apple mobile app or by manually entering the code through your key fob. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to be started again. This is a great method to discourage thieves. If the vehicle is unable to be started, they will move on.

The Ghost is a small, weatherproof device that can be hidden away in the most inaccessible areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also easy to remove if you decide to switch vehicles, or to give it to a service center or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, which is recognized by a few insurance companies. It also has a safe emergency Pin Code override and features the Service/Valet Mode which can be activated using a button on the app or with your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which are able to be removed Ghost immobilisers are hidden and integrated into the car. They are nearly impossible to bypass or hack and, even if they are discovered, a burglar is unable to start the engine. This is because a ghost immobiliser blocks key cloning, signal jamming and device spoofing, all of which are methods that are used frequently by thieves to gain access to cars fitted with standard immobilisers.

An immobiliser functions by sending a code to the ECU (electronic control unit). If the wrong code is sent and the vehicle is not launched as the engine will not fire up. While it is possible to disable the ghost immobiliser by using a software tool this would be very time-consuming and difficult. Only an authorized installer can install and use the software.

The Ghost immobiliser is a tiny device that is part of the wiring loom of the vehicle and is inaccessible to the naked eye once installed. It won't show up on diagnostic systems, there are no LED indicators and it will not communicate with the engine through the OBD port. It communicates in silence via the CAN data loop.

The system will prevent the vehicle from starting unless it is given a specific PIN code sequence. This code is entered using buttons on the steering wheel and door panels as well as the centre console. This is a more secure method to protect the car, since it doesn't require the use of a remote or key fob.

autowatch ghost 2 immobiliser also has a service mode that can be turned on via the mobile application. This lets you hand over your keys to someone else for valet parking or service without having to enter an arm-disarm sequence.

No matter if your Ghost is in service mode or not, you should not attempt to remove the system yourself as it can affect the engine and cause damage. It is recommended that you contact an TASSA verified installer who can remove the system safely and correctly. Our latest GHOST II immobilisers also come with an exclusive QR fingerprint sticker that is hidden in various areas of your vehicle, these are linked to our global security register. In the event that the system is removed and is sold on the black market, this will link it back to its original owner.

Anti-Hijack

Ghost Immobiliser 2 has a extremely useful anti-hijack feature. This system works like smart keys and is one of the most secure ways to protect your vehicle from theft. Whenever the ignition switch is turned to on, and the vehicle is stationary for 30 seconds and the Ghost system will automatically stall the engine and turn the hazards lights on. This allows the driver and passengers time to press the secure button before the system is activated.

The Ghost system, unlike most competitors, utilizes an electronic timer and controller that shuts off the valve that shuts off fuel after a set period of time. This happens regardless of whether the ignition is on. This delay time period needs to be long enough to allow the hijacked owner of the vehicle to drive away from the scene of the robbery and sufficient distance from the stalled vehicle before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking capabilities of the ghost 11 immobiliser 2 immobiliser review - hop over to this website - system, it also comes with an extra level of security that prevents common hacking techniques used to gain access to modern vehicles, such as relay attacks key range extending, key range hacking and ECU swapping. The Ghost system communicates in a quiet way and does not emit signals that can be picked by a thief using codes-grabbing or RF scanning technology.

The Ghost system features the valet or service mode that allows your vehicle to be re-started and driven without the need for PIN code. This is a great option if you park your car and only require it to be left for a short time for a few minutes, like to open the garage door or place groceries in the boot. The system will exit the service mode based upon the speed and time or by the simple input of a PIN code process. This gives you total security that only YOU can drive your car!

Keyless Entry

Many customers are now seeking out additional security measures due to the rising trend of car thefts using contactless technology. This is especially true for those who have invested time or money in personalizing their vehicles and own expensive or rare vehicles. An add-on immobiliser can be an affordable method to stop this kind of theft since it can prevent your vehicle from starting unless the right pin code is entered on your key fob.

Immobilisers are made to work with different vehicle circuits, including those that control starter motors and fuel pumps. They also can shut the car alarm to draw attention to and frighten away any potential thieves.

These devices communicate directly with the engine control unit using the CAN data network and prevent the thief from bypassing it by installing a new ECU or by using key programmers. These immobilisers are installed in a discreet manner and leave no trace on your vehicle. They are also not detected by hi-tech thieves' tools.

The Ghost immobiliser is different from other systems that require the driver to wear an app or tag. Instead, you are able to select your personal pin sequence by pressing the pattern on your door, steering panel, or centre console. The pin can be changed as frequently as you'd like, meaning it's as secure as a credit card. It is even more difficult to hack due to it requiring up to 20 presses.

Ghost also has the Valet/Service mode, which allows you to deactivate the system if your car is going to be handed over for valet parking or for service, enabling it to operate within predetermined guidelines, such as a 30mph speed limit, so you don't have to worry about your vehicle being driven recklessly. It can then be reactivated by using the original key or key that corresponds to the entry code.

Installed by our certified installers and certified installers, it is the most secure and effective aftermarket CAN-immobiliser on the market. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also provided with six QR fingerprint labels, an ISR contact card that contains your unique QR code, as well as a secure emergency code which are kept in your purse or wallet of your car.