Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. However If you have double pane windows that are secured by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea tape the gap once the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might think about the security door with an integrated Window Repair, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the fit. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it can also be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and perform a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on how serious the issue is, old caulking may have to be removed. It is essential to remember that when it is about upvc window repairs near me window repairs, Window Repair you should not be tempted to apply too much caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with an ease. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you to hold the frame.

Check that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrow on each hinge, this shows which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to give assistance.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. First, the hinges due to wear and tear can become misaligned, this will cause an opening to appear between the sash and the frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. In addition, the interlock could also become disaligned. It is located on the hinge's side, and might require to be cleaned. In some instances it might be necessary to replace these.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be positioned on top of your windowsill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it is more cost-effective to replace them instead of fixing them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.